Вестник МГТУ, 2024, Т. 27, № 3.

Вестник МГТУ. 2024. Т. 27, № 3. С. 437-446. DOI: https://doi.org/10.21443/1560-9278-2024-27-3-437-446 References Akulich, A. V., Lustenkov, A. V. 2004. Study of the hydrodynamics of a vortex spiral-conical dust collector for separating gas-dispersed flows of food production. Izvestiya Vuzov. Food Technology, 2-3(279-280), pp. 99-101. EDN: QCUVRX. (In Russ.) Alekseev, G. V., Sergacheva, E. S., Leu, A. G., Goncharov, M. V. 2017. Assessment of the performance of new shell-type working bodies for cleaning and grinding food raw materials. Vestnik o fMSTU, 20(3), pp. 533-540. DOI : https://doi.org/10.21443/1560-9278-2017-20-3-533-540. ( In Russ.) Amosov, P. V., Baklanov, A. A., Makarov, D. V., Masloboev, V. A. 2022. Numerical modeling of atmospheric pollution in the approaches of random selection of discrete dust areas and interval distribution of dust size. Vestnik o fMSTU, 25(1), pp. 61-73. DOI: https://doi.org/10.21443/1560-9278-2022-25-1-61-73. EDN: YBIHJK. (In Russ.) Vedernikov, S. A., Romanyuk, E. V., Rassadnikov, D. N. 2023. Development and use of inertial dust collectors for fire and explosion hazardous industries. Modern Problems o f Civil Protection, 4(49), pp. 129-135. EDN: OBTBJV. (In Russ.) Dmitriev, A. V., Zinurov, V. E., Dmitrieva, O. S., Dang, S. V. 2018. Modeling of the separation process of oil- water emulsion in a rectangular separator. Bulletin o f the Kazan State Energy University, 3(39), pp. 65-71. EDN: ITHYXX. (In Russ.) Zinurov, V. E., Dmitriev, A. V., Dmitrieva, O. S. 2020. Collecting fine droplets from a gas flow in a separation device with I-beam elements. Industrial Power Engineering, 12, pp. 47-53. DOI: 10.34831/EP.2020.23.49.008. EDN: OJKKGX. (In Russ.) Kouzov, P. A. 1974. Fundamentals of analysis of the dispersed composition of industrial dusts and crushed materials. Leningrad. (In Russ.) Nikolaev, A. N., Nurtdinov, N. M., Kharkov, V. V. 2015. Efficiency of inertial deposition of particles on liquid drops in hollow vortex devices when cleaning emissions from food production. Herald o f Technological University, 18(3), pp. 294-296. EDN: TJUMNB. (In Russ.) Rudyka, E. A., Baturina, E. V. 2016. Analysis of dust cleaning equipment used in the production of soluble powders. Proceedings o f the Voronezh State University o f Engineering Technologies, 2(68), pp. 193-196. DOI: https://doi.org/10.20914/2310-1202-2016-2-193-196. (In Russ.) Rudyka, E. A., Baturina, E. V., Semenikhin, O. A., Matyushchenko, I. N. 2010. Modernization of exhaust air purification devices in the food industry. Bulletin o f Voronezh State Technical University, 6(8), pp. 40-41. EDN: MTGMGJ. (In Russ.) Salakhova, E. I., Dmitriev, A. V., Zinurov, V. E. 2022. Study of the structure of the gas flow in a separation device with arc-shaped elements. Herald o f Technological University, 25(5), pp. 60-64. DOI: 10.55421/ 1998-7072_2022_25_5_60. EDN: MFFMIT. (In Russ.) Terekhova, O. N., Glebov, A. A., Duyunova, Ya. S. 2019. Fine air separation of dispersed particles in grain processing processes. Bulletin o fAltai State Agricultural University, 5(175), pp. 140-147. EDN: KNRGUK. (In Russ.) Titenok, A. V., Amelin, A. V., Katsenko, E. N. 2020. Industrial dust. Bulletin o f the Bryansk State Agricultural Academy, 4(80), pp. 62-72. EDN: HGAAWB. (In Russ.) Tukmakov, A. L., Kharkov, V. V., Akhunov, A. A. 2022. Pneumatic separation of polydisperse gas suspension fractions in a low-speed flow. Journal o f Engineering Physics and Thermophysics, 95(4), pp. 918-924. EDN: QESYGG. (In Russ.) Turchaninova, T. P., Grechannikov, T. V., Eyvin, P. S. 2016. Highly efficient process air purification system for flour mills, bakeries and other food enterprises. Food Industry, 6, pp. 24-26. EDN: WDGCWJ. (In Russ.) Uzhov, V. N. 1962. Fighting dust in industry. Moscow. (In Russ.) Chistyakov, Ya. V., Makhnin, A. A., Nevsky, A. V. 2012. Separation of gas and dust flow in a centrifugal inertial dust collector from the standpoint of an environmental and economic approach. Vestnik MITHT im. M. V. Lomonosova, 7(3), pp. 92-96. EDN: PBNCEJ. (In Russ.) Chistyakov, Ya. V., Muratova, K. M., Volodin, N. I. 2016. Fundamentals of separation of fine dust in a centrifugal-inertial dust collector. Ecology and Industry o f Russia, 20(8), pp. 20-27. DOI: https://doi.org/ 10.18412/1816-0395-2016-8-20-27. EDN: WHOGAP. (In Russ.) Shvab, A. V., Evseev, N. S. 2015. Study of the process of particle separation in a turbulent swirling flow. Theoreticalfoundations o f chemical technology, 49(2), pp. 197. DOI: https://doi.org/10.7868/s0040357115020128. EDN: TLOTBF. (In Russ.) Shtokman, E. A., Shilov, V. A., Novgorodsky, E. E., Skorik, T. A. et al. 2007. Ventilation, air conditioning and air purification at food industry enterprises. Moscow. (In Russ.) Shuvalov, S. I., Novoseltseva, S. S., Verenin, A. A., Voroshilov, O. A. 2017. Mathematical model of a dust system with a ball drum mill for the analysis of classification schemes. Bulletin o f the Ivanovo State Energy University, 5, pp. 10-18. DOI: https://doi.org/10.17588/2072-2672.2017.5.010-018. EDN: ZOFLDV. (In Russ.) 445