Вестник МГТУ, 2023, Т. 26, № 4.

Сафин А. Р. и др. Моделирование работы устройства индукционного зарядного. References Safin, A. R., Ivshin, I. V., Tsvetkov, A. N., Dolomanyuk, L. V. et al. 2021. The study of the design features of mobile installations for the charge of electric transport for the development of draft design documentation. Vestnik Kazanskogo gosudarstvennogo energeticheskogo universiteta, 13(3(51)), pp. 15-24. EDN: KMOTRQ. (In Russ.) Safin, A. R., Kozyrev, A. B., Petrov, T. I., Nizamiev, M. F. et al. 2022. Determination of the parameters of the inductance coils of an induction charger for a non-contact method of charging electric vehicles. News o f higher educational institutions. Energy problems, 24(5), pp. 74-83. DOI: https://doi.org/10.30724/1998- 9903-2022-24-5-74-83. EDN: GPYWAY. (In Russ.) Ahmad, A., Alam, M. S., Mohamed, A. A. S. 2019. Design and interoperability analysis of quadruple pad structure for electric vehicle wireless charging application. IEEE Transactions on Transportation Electrification, 5(4), pp. 934-945. DOI: https://doi.org/10.1109/tte.2019.2929443. Bentalhik, I., Lassioui, A., EL Fadil, H., Bouanou, T. et al. 2022. Analysis, design and realization of a wireless power transfer charger for electric vehicles: Theoretical approach and experimental results. World Electric Vehicle Journal, 13(7). Article number: 121. DOI: https://doi.org/10.3390/wevj13070121. Bouanou, T., El Fadil, H., Lassioui, A., Assaddiki, O. et al. 2021. Analysis of coil parameters and comparison of circular, rectangular, and hexagonal coils used in WPT system for electric vehicle charging. World Electric Vehicle Journal, 12(1). Article number: 45. DOI: https://doi.org/10.3390/wevj12010045. Bouanou, T., El Fadil, H., Lassioui, A., Bentalhik, I. et al. 2023. Methodology and circuit analysis of wireless power transfer systems applied to electric vehicles wireless chargers. World Electric Vehicle Journal, 14(5). Article number: 117. DOI: https://doi.org/10.3390/wevj14050117. Buja, G., Bertoluzzo, M., Mude, K. N. 2015. Design and experimentation of WPT charger for electric city car. IEEE Transactions on Industrial Electronics, 62(12), pp. 7436-7447. DOI: https://doi.org/10.1109/ tie.2015.2455524. Cui, H., Zhong, W., Li, H., He, F. et al. 2018. A study on the shielding for wireless charging systems of electric vehicles. IEEE Applied Power Electronics Conference and Exposition (APEC). San Antonio, TX, USA, pp. 1336-1343. DOI: https://doi.org/10.1109/apec.2018.8341190. Jiao, C., Xu, Y., Li, X., Zhang, X. et al. 2021. Electromagnetic shielding techniques in the wireless power transfer system for charging inspection robot application. International Journal o fAntennas and Propagation. Article number: 9984595. DOI: https://doi.org/10.1155/2021/9984595. Kerid, R., Bourouina, H. 2019. Analysis of wireless power transfer system with new resonant circuit for high efficiency using perforated capacitors. Arabian Journal for Science and Engineering, 44, pp. 2445-2451. DOI: https://doi.org/10.1007/s13369-018-3579-2. Kim, H., Song, C., Kim, D.-H., Jung, D. H. et al. 2016. Coil design and measurements of automotive magnetic resonant wireless charging system for high-efficiency and low magnetic field leakage. IEEE Transactions on Microwave Theory and Techniques, 64(2), pp. 383-400. DOI: https://doi.org/10.1109/tmtt.2015.2513394. Kuzey, S., Balci, S., Altin, N. 2017. Design and analysis of a wireless power transfer system with alignment errors for electrical vehicle applications. International Journal o f Hydrogen Energy , 42(28), pp. 17928­ 17939. DOI: https://doi.org/10.1016/j.ijhydene.2017.03.160. Lassioui, A., El Fadil, H., Rachid, A., El-Idrissi, Z. et al. 2020. Modelling and sliding mode control of a wireless power transfer system for BEV charger. International Journal o f Modelling, Identification and Control , 34(2), pp. 171-186. DOI: https://doi.org/10.1504/IJMIC.2020.110358. Lu, F., Zhang, H., Hofmann, H., Mi, C. C. 2016. An inductive and capacitive combined wireless power transfer system with LC-compensated topology. IEEE Transactions on Power Electronics, 31(12), pp. 8471-8482. DOI: https://doi.org/10.1109/tpel.2016.2519903. Lukic, S., Pantic, Z. 2013. Cutting the cord: Static and dynamic inductive wireless charging of electric vehicles. IEEE Electrification Magazine, 1(1), pp. 57-64. DOI: https://doi.org/10.3390/wevj13070121. Nemirovskiy, A., Gracheva, E., Bashirov, M. 2021. Experimental study of the relationship between the technical state of a power transformer and the parameters of the higher harmonic components of currents and voltages generated by it. In Sustainable Energy Systems: Innovative Perspectives. Eds.: A. Sinitsyn. Vol. 141, pp. 155-166. DOI: https://doi.org/10.1007/978-3-030-67654-4_18. Panchal, C., Stegen, S., Lu, J. 2018. Review of static and dynamic wireless electric vehicle charging system. Engineering Science and Technology, an International Journal, 21(5), pp. 922-937. DOI: https://doi.org/ 10.1016/jjestch.2018.06.015. Tabachnikova, T. V., Gracheva, E. I., Naumov, O. V., Gorlov, A. N. 2020. Forecasting technical state and efficiency of electrical switching devices at electric complexes in oil and gas industry. IOP Conference Series: Materials Science and Engineering, 860. Article number: 012014. DOI : https://doi.org/10.1088/1757- 899x/860/1/012014. 420