Труды КНЦ (Технические науки вып.2/2025(16))

Труды Кольского научного центра РАН. Серия: Технические науки. 2025. Т. 16, № 2. С. 164-168. Transactions of the Kola Science Centre of RAS. Series: Engineering Sciences. 2025. Vol. 16, No. 2. P. 164-168. 4. Bhagia S., Agrawal R., Satlewal A., Durkovic J., Lagana R., Yoo C., Zhao X., Kunc V., pu Yunqiao, Ozcan S., Ragauskas A. Critical reviewofFDM3DprintingofPLAbiocomposites filledwithbiomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries. Appl. Mater.Today, 2021, vol. 24, p. 101078. 5. Shaffer S., Yang K., Vargas J., Prima M., Voit W. On reducing anisotropy in 3D printed polymers via ionizing radiation. Polymer, 2014, vol. 55 (23), pp. 5969-5979. 6. Akter M., Uddin M., Tania I. Biocomposites based on natural fibers and polymers: A review on properties and potential applications. Journal o fReinforced Plastics and Composites, 2022, vol. 41 (17-18), pp. 705-742. 7. Mastalygina E., PodzorovaM., Pantyukhov P., Popov A. Fibers and Filaments fromPolylactic Acid: ProductionFeatures, Structure, and Physical-Mechanical Properties, Polym. Sci. Ser. D., 2024, vol. 17, pp. 181-186. 8. Farah S., Anderson D., Langer R. Physical and Mechanical Properties of PLA, and Their Functions in Widespread Applications - A Comprehensive Review. Adv. Drug Deliv. Rev, 2016, vol. 107, pp. 367-392. 9. Pavon C., Aldas M., Samper M., Motoc D., Ferrandiz S., Lopez J. Mechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO3 Fillers from Natural Resources. Polymers , 2022, vol. 14, p. 2646. 10. Cherkashina N., Kuprieva O., Pushkarskaya D., Kashibadze N., Shrubchenko L. Modification of buckwheat husk powder and creation of composite material on its basis, Physica Scripta, 2024, vol. 99, p. 105921. 11. Cherkashina N., Pavlenko Z., Matveenko D., Domarev S., Pushkarskaya D., Ryzhikh D. Synthesis and Characteristics of Composite Material with a Plant-Based Filler. ChemEngineering, 2023, vol. 7 (2), p. 38. Информация об авторах Н. И. Черкашина — доктор технических наук, ведущий научный сотрудник; Д. В. Пушкарская — аспирант, младший научный сотрудник; Е. В. Форова — инженер-исследователь; Л. Ф. Шрубченко — инженер-исследователь. Information about the authors N. I. Cherkashina — DSc (Engineering), Leading Researcher; D. V. Pushkarskaya — Postgraduate Student, Research Assistant; E. V. Forova — Research Engineer; L. F. Shrubchenko — Research Engineer. Статья поступила в редакцию 23.06.2025; одобрена после рецензирования 07.07.2025; принята к публикации 21.07.2025. The article was submitted 23.06.2025; approved after reviewing 07.07.2025; accepted for publication 21.07.2025. 168 © Черкашина Н. И., Пушкарская Д. В., Форова Е. В., Шрубченко Л. Ф., 2025